Products >  FiberOptic >  DX3000


DX3000

DX3000

Magnifier

K438-0W DVI/VGA extender over fiber Singlemode up 10000m



 Specifications

 Manual

 Brochure

 More Info

Products Features

  • Perfect Image Quality at all Resolutions
  • Supports both VGA and the latest DVI video interfaces (future proof your investment)
  • Supports Mixed DVI and VGA operation
  • Video Resolutions up to 1600 x 1200 @ 60Hz using Cat5 or Fiber Optic Cable
  • Local Console Option (Dual Access)
  • Transparent to USB 1.1
  • No length restrictions for particular video resolutions
  • Fiber Optic Extension uses only TWO Fibers
  • Transmission length:
    • 100 m with regular Cat5 cable
    • (200 m with repeater)
    • 200 m with 62,5/125¨ Multi-mode Fiber Cable
    • 400 m with 50/125¨ Multi-mode Fiber Cable
    • 10 km with 9/125¨ Single-mode Fiber Cable
  • Compatible with all operating systems
  • Compatible with all major KVM Switches
  • Rack Mount options (19"): Mount up to 3 devices in 19"/1U or up to 6 devices in 19"/1U or up to 6 devices in 19"/2U. This saves expensive rack space.


  • Application

    DX3000 - The Future of KVM Extension

    With Flat panel displays becoming more prevalent it is natural to drive them digitally through their DVI interface to obtain optimum image quality. DX3000 supports DVI extension up to resolutions of 1600 x 1200 to ensure the benefits of using DVI are maintained even if you locate your monitor 10 km away!

    The DX3000 consists of a Transmitter unit and a Receiver unit. These two devices enable long-distance, loss less transmission of DVI video signals between a digital video source and a digital display device. The DX3000 is equipped with DVI-digital (Digital Visual Interface) connectors for a single-link and optional USB 1.1. The DX3000 receiver is small enough to be attached near a projector. With the DX3000, the maximum distance between the source and digital display is 330 feet (100 m) using cat5 and up to 10,000ft using fiber optic.

    VGA, DVI and more
    DX3000 supports traditional analog VGA as well as digital DVI. All combinations of DVI and VGA (graphics cards and monitors) are supported allowing equipment to be mixed. You could use DX3000 today to extend (with perfect image quality) your existing SVGA equipment. Later, if you purchase a DVI monitor you can use it with DVX3000 even though your computer is equipped with a VGA graphic card. When you finally upgrade to a DVI graphic card, DX3000 will continue to extend your system without any reconfiguration.

    Flexibility
    DX3000 has a modular architecture providing superb flexibility. Not only are all standard peripheral connections supported keyboard and mouse, but also the different cabling interfaces (depending on model) for bridging the required distance: Cat5 network cable, Multi-mode or Singlemode fibre cables. Other interfaces may also be added such as Serial Port for Touch-Screen, Stereo Audio, Base-Band Video Transmission, USB, 10BaseT Network Management, Parallel Port or other custom interfaces.

    The Features
    Depending on the type of device, you can connect monitors with a resolution of up to 1600x1200 pixels. You can use a Mac, SUN Keyboard/Mouse or USB Devices. The highly dense packing of the electronic components gives you the ability to mount this unit in a slim, tight housing, which can be placed on the table, as well as mounted at a wall as well as stacked in a 19" Housing. Bridging the distance with a Cat5 cable (used with a 10BaseT network), you can bridge at least 100m (app. 330ft). Using only 2 fibers of a fiber optical cable (i.e. FOIRL from fiber networking or Fiber To The Desk, ...) you can bridge 200m (app. 650ft) with a 62.5 micron fiber and up to 400m (app. 1310ft) with a 50 micron fiber. If you use single mode fibers/devices, you can extend the distance up to 10km (app 6 1/4 miles) Using fiber devices, you do not only have the advantage of extended cable length, but your line is also absolutely unaffected by electromagnetic interferences (EMI). You have electromagnetic protection against lightings and over voltage. And very good protection for your data.

    On Screen Display
    You can easily adjust all necessary device parameters through a OSD. Personal selections of color temperature, brightness, contrast, etc.

    Connecting Cables
    Cat5 Modules: S/UTP (Cat5) cable acc. to EIA/TIA 56A or TSB 36 or Digital STP 17-03170.Four pairs AWG 24. compatible with EIA/TIA 568A

    Multimode Modules:
    Two fibers 50¨em or 62.5¨em. E.g. I-V(ZN)H 2G50 or I-V(ZN)HH 2G62,5 or I/AD(ZN)H 4G50.

    Ordering Information


     Model# 

     Description 
     Price 
     Purchase 
     DX3000 
     K438-0W DVI/VGA extender over fiber Singlemode up 10000m 
     Buy Now 


    Application Diagram


    This is an example of what a setup would look like.


    For more detailed information on specific models, Please Contact our sales representative at:


    Toll Free: 1-800-487-2243




    © 2007 SmartAVI, Inc. All Rights Reserved.
    Use of this site indicates that you accept the Terms of Use and the Privacy Statement.

    SmartAVI manufactures and markets DVI extenders, video extenders, video switches, kvm extenders, and ir extenders. Our DVI extenders extend DVI over CAT5 and fiber optic cables. SmartAVI's video extender solutions are unique because of our long experience in the computer industry. It is this technology expertise that allows us to give our customers flexible and unique video swicthes at very competitive prices. We specialize in audio and visual extension, switching and routing. Our products enable DVI extenders, KVM extenders, Video extenders and video switches for audio and visual configurations.